ping and traceroute 1.2.3.3

The following baseline was taken with the network fully operational

PerGuest2>ping 1.2.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.2.3.3, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 9/11/13 ms
PerGuest2>traceroute 1.2.3.3
Type escape sequence to abort.
Tracing the route to 1.2.3.3
VRF info: (vrf in name/id, vrf out name/id)
  1 10.1.25.3 !A  *  !A
PerGuest2>

The same commands were executed after a PERD2 failure with the following results:

PerGuest2>ping 1.2.3.3
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.2.3.3, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
PerGuest2>traceroute 1.2.3.3
Type escape sequence to abort.
Tracing the route to 1.2.3.3
VRF info: (vrf in name/id, vrf out name/id)
  1  *  *  *
  2  *  *  *
  3  *  *  *
  4  *  *  *
  5  *  *  *
  6  *  *  *